# MEC294 Thermofluids Lab Assignment Sample UiTM Malaysia

In the MEC294 Thermofluids Lab Assignment, you will be asked to measure and record temperature fluctuations in a flask of warm water. The data that your readings produce are expected to show an increase over time before plateauing at about 36 degrees Celsius (97 Fahrenheit). At this point, likely, there won’t have been any change since conditions were set up last week so take note if nothing significant happens after 24 hours! You can also check our lab manual for information on how best practices should go ahead with these types of experiments when performing them yourself.

The objective of this assignment is to use the data collected from your experiment to create a graph that plots temperature against time. Your task is to then analyze the results and write a short report (1-2 pages) detailing what you have observed in the data and any conclusions that can be drawn from it.

When plotting your data, it is important to use the correct scale on the axes so that your results are easily visible. For example, if you’re recording temperatures in Celsius, then use a scale of 0-40 degrees on the y-axis. If you’re using Fahrenheit, use a scale of 95-105.

When you have completed your readings, graph the data using a temperature vs. time axis. The gradient of your line will give the average rate of increase in temperature throughout the experiment while the y-intercept will correspond to the starting temperature.

## Get Solution For MEC294 Thermofluids Lab Assignment

We are here at any time of day or night, so if you ever need help with a Thermo fluids lab exercise remember that we’re just an email away. There’s no need to struggle with complex equations or confusing concepts, our experts will provide you with a detailed explanation of the solution so that you can easily follow along.

### Assignment Brief 1: Measure and analyse the data obtained from each experiment.

It is crucial to measure and analyze the data obtained from every experiment to maintain accurate and precise results. There are many ways to measure data, but the most common method is using a ruler or a stopwatch. When using a ruler, it is important to make sure that the object being measured is placed in the centre of the zero mark. To get an accurate measurement, it is necessary to use the same type of ruler or measuring tape. Otherwise, discrepancies may occur.

Another way of measuring data is by using a stopwatch. This method is utilized when trying to see how long an event takes place such as how long it takes for a person to run around a track. First, start the stopwatch when the event begins. Once the event is completed, stop the stopwatch. The time recorded on the stopwatch will be the amount of time it took for the event to take place.

After collecting data from each experiment, it is important to analyze that data. This can be done in many ways, but a common method is creating a graph.

### Assignment Brief 2: Show the ability to use thermodynamics and fluid mechanics laboratory equipment following the established procedures.

Thermodynamics and fluid mechanics are two of the most important branches of physics. To be able to properly use the laboratory equipment for these areas of study, you must follow established procedures.

The first thing you need to do is to make sure that all of the necessary equipment is set up correctly. This includes ensuring that the proper experimental setup is in place and that all of the necessary instruments are calibrated and ready to be used. Once everything is set up, you can then begin your experiment.

It is important to remember that thermodynamics and fluid mechanics are both highly complex fields of study. As such, you should take care to record all of your data clearly and concisely. This will help you to properly analyze your results and to identify any areas that need further investigation.

If you follow these basic guidelines, you will be able to successfully use the laboratory equipment for thermodynamics and fluid mechanics. With proper care and attention, you can obtain accurate and reliable results from your experiments.

### Assignment Brief 3: Perform the experiments to establish relationships between theoretical and practical aspects.

When it comes to performing experiments to establish a relationship between theoretical and practical aspects, there are a few things that you will need to keep in mind.

First and foremost, you will need to be aware of the purpose of the experiment. What is it that you hope to learn or prove through this experiment? Once you have a clear understanding of the goals of the experiment, you can then begin planning its execution. Keep in mind that regardless of how well-planned an experiment is, there is always the potential for error. This is why it is important to establish a clear control group against which you can compare your results.

By performing multiple trials of an experiment and recording your findings meticulously, you can minimize the chances of error and gain a greater understanding of the relationship between theory and practice.

## Pay For MEC294 Thermofluids Lab Assignment Help

Assignment helper Malaysia is a professional company that offers creative writing and editing services to students in need. We can help with all your essays, term papers or even dissertations.

We’re here to help you get the grades that make your parents proud. We offer affordable and high-quality online university assignments, so all of our students can feel confident in their accomplishments.

We are here to provide you with the best essay help in Malaysia. Whether it’s an undergraduate or postgraduate level paper, we’ll be able to take care of everything and write a perfect piece that will match your specific needs.

Homework Helper is the leading online platform for finding and buying research papers, essays & projects. We have helped thousands of students across Malaysia with their studies. Our writers are professional experts in various disciplines so you can be sure that we will deliver high-quality work on time.

## Private and Confidential

Yours all information is private and confidential; it is not shared with any other party. So, no one will know that you have taken help for your Academic paper from us.

Online Exam & Assignment Writing Services

11770+ Orders Delivered

4.9/5
5 Star Rating

Confidential & Secure

Group Assignment Help

Online Exam -Test & Quiz

Cheapest Price Quote

Diploma & Certificate Levels

Semester & FYP Papers

Summative & Individual

GBA & Reflective

Last Minute Assistance

##### CBE686 Safety And Health In Chemical And Bioprocess Industries UITM Assignment Sample Malaysia
CBE686 Safety and Health in Chemical and Bioprocess Industries course offered by UITM. This course is designed to provide you with an understanding of the fundamental principles and best practices…
Science
##### LAS687 Environmental Impact Assessment Assignment Sample UiTM Malaysia
The EIA course will focus on the examination of purpose, principles and practical application. It explores how Environmental Impact Assessment has been used as a tool for preventing environmental problems…
Science

UP TO 15 % DISCOUNT

Instant Paper Writing Services by Native Malaysia Writers

Plagiarism Free Solutions
100% Original Work
24*7 Online Assistance
Native PhD Experts
Hire a Writer Now